Prolink Haus VM IV Series – 3.6 KVA and 5.6KVA – Integrasi Multimedia Indonesia

Description

Haus VM IV Series is an off-grid (hybrid) inverter that converts solar energy from solar panels into pure sine wave output and provides power supply for both residential and commercial applications.

• Pure sine wave solar Inverter
• Output power factor 1.0
• Customizable status LED ring with RGB lights
• Touchable button with 4.3″ colored LCD
• Built-in Wifi for mobile monitoring (App is available)
• Supports USB On-the-Go function
• Data log events stored in the inverter
• Built-in BMS communication for Lithium-ion Batteries
• Battery independent design
• Battery equalization extends lifecycle
• User-friendly LCD operation
• Enhanced charging power
• Built-in anti-dust kit

Features

Haus V Series – Prolink

Pure sine wave output

LCD display

Battery independent design

Output Power Factor 1.0

USB On-The-Go Function

Allows for updating firmware on the inverter, and downloading of history and events for analysis on the USB drive.

Enhanced Charging Power

Enable safe, efficient and fast (up to 120A) unattended charging of a battery from a mains power source or generator

Built-In Anti-Dust Kit

Helps to filter dust sucked in by the cooling fan and allows for easy regular maintenance so that the inverter can perform at optimum efficiency in a harsh environment.

Pure Sine Wave Output

Provides clean and consistent pure sine wave power that improves equipment’s performance and efficiency.

Mobile Monitoring

Enjoy the convenience of monitoring the inverter’s data from mobile app anytime and anywhere than physically checking your inverter screen all the time.

Selectable Input Voltage Range

Two selection modes with narrow input voltage range, suitable for sensitive appliances such as personal computers, and wide input range that can sufficiently support general home appliances.

Touchable Button With 4.3″ Coloured LCD Display

Useful information such as output voltage and power conditions are shown at a glance through with the LCD display.

Customizable Status LED Ring

Programmable RGB lighting and effects for different operation mode.

Built-In BMS Communication

Provides advanced monitoring and management to lithium-ion battery in the prevention of overcharging and protection against under-voltage and high temperatures of short circuits.

Battery Independent Design

Battery connection is not compulsory as power from grid or solar source can be supply directly to the load.

Battery Equalization

Solar battery voltage levels are automatically balanced throughout the pack to optimize the battery performance and lifespan.

Specifications

Rated power

Haus VM IV 3.6KM-24: 3600VA/3600W
Haus VM IV 5.6KM-48: 5600VA/5600W

Input nominal voltage

230VAC

Input voltage range

170 – 280VAC (For personal computers)

90 – 280VAC (For home appliances)

Input frequency range

50/60Hz (Auto sensing)

Output voltage

230VAC ± 5%

Output surge power

Haus VM IV 3.6KM-24: 7200VA
Haus VM IV 5.6KM-48: 11200VA

Output efficiency (peak)

90% – 93%

Output transfer time

15ms (For personal computers)

20ms (For home appliances)

Battery voltage

Haus VM IV 3.6KM-24: 24VDC
Haus VM IV 5.6KM-48: 48VDC

Floating charge voltage for battery

Haus VM IV 3.6KM-24: 27VDC
Haus VM IV 5.6KM-48: 54VDC

Overcharge protection for battery

Haus VM IV 3.6KM-24: 33VDC
Haus VM IV 5.6KM-48: 63VDC

Maximum PV array power

Haus VM IV 3.6KM-24: 4000W
Haus VM IV 5.6KM-48: 6000W

Max. PV array open circuit voltage for solar charger

500VDC

Solar charger type

MPPT

Max. solar charge current

120A

Max. AC charge current

100A

Max. charge current

120A

Physical

Dimension, D x W x H (mm)

115mm (D) x 300mm (W) x 400mm (H)

Net Weight (kgs)

Haus VM IV 3.6KM-24: 9.0
Haus VM IV 5.6KM-48: 10.0

Communication Interface

USB/RS232/RS485/WiFi/Dry-contact

Environment

Humidity

5% to 95% Relative Humidity (Non-condensing)

Operating Temperature

-10°C to 50°C

Storage Temperature

-15°C to 60°C

Prolink Haus VM IV Series – 3.6 KVA and 5.6KVA

Key Features

Description