Prolink Haus V Series
Key Features
- Pure sine wave solar inverter
- Selectable charging current
- Wide input voltage
- Configurable AC/Solar input priority
Description
Haus V Series is an off-grid (hybrid) inverter that converts solar energy from solar panels into pure sine wave output and provides power supply for both residential and commercial applications.
• Pure sine wave solar inverter
• Output power factor 1.0
• Selectable high power charging current
• Wide DC input range
• Selectable input voltage range for home
appliances and personal computers
• Configurable AC/Solar input priority via LCD setting
• Compatible with mains voltage or generator power
• Auto restart while AC is recovering
• Overload and short circuit protection
• Smart battery charger design for optimized battery performance
• Cold start function
Features

![]() |
Pure sine wave output |
|---|---|
![]() |
LCD display |
![]() |
Wide input voltage |
Output power factor 1.0
![]() |
Advanced protectionKeeps your equipment protected from short circuit and overload. |
|---|---|
![]() |
Cold start functionThe inverter can be switched on in the absence of mains power. |
![]() |
Dual power inputsCompatible with mains voltage or generator power. |
Pure Sine Wave Output

Provides clean and consistent pure sine wave power that improves equipment’s performance and efficiency.

Smart battery charger design for optimized battery performance
Haus V Series | 1KW-5KW Features:
- Pure sine wave output
Provides clean and consistent pure sine wave power that improves equipment’s performance and efficiency. - Selectable input voltage range
Two selection modes with narrow input voltage range, suitable for sensitive appliances such as personal computers, and wide input range that can sufficiently support general home appliances. - Selectable high-power charging current
Safe, efficient and fast charging of battery bank even with higher total capacity - Built-in smart charging design
Helps to extend maximum performance and life from your battery with more precise charging capabilities. - Configurable output source priority (Solar/AC)
Set the sequence via LCD panel to meet the power demand based on user preferences or specific requirements.
- Auto restart while AC is recovering
Inverter can automatically restart in the event of AC recovery
Specifications
| Rated power |
|
|---|---|
| Input nominal voltage | 230VAC |
| Input voltage range |
170 – 280VAC (For personal computers) 90 – 280VAC (For home appliances) |
| Input frequency range | 50/ 60Hz (Auto sensing) |
| Output voltage | 230VAC ± 5% |
| Output surge power |
|
| Output efficiency (peak) | 90 – 93% |
| Output transfer time |
10ms (For personal computers) 20ms (For home appliances) |
| Battery voltage |
|
| Floating charge voltage for battery |
|
| Overcharge protection for battery |
|
| Maximum PV array power |
|
| Max. PV array open circuit voltage for solar charger |
|
| Solar charger type |
|
|
Max. solar charge current |
|
| Max. AC charge current |
|
| Max. charge current |
|
| Dimension, D x W x H (mm) |
|
| Net Weight (kgs) |
|
Environment
| Humidity | 5% to 95% Relative Humidity (Non-condensing) |
|---|---|
| Operating Temperature | -10°C to 50°C |
| Storage Temperature |
-15°C to 60°C |
Related products
Dante AVIO Analog Input Adapter 1×0
Dante AVIO Analog Input Adapter 2×0
Dante AVIO Bluetooth IO 2X1 Adapter
Dante AVIO USB IO Adapter 2×2
Shure SB930 Rechargeable Battery
Shure SLXD3 Plug-On Digital Wireless Transmitter With XLR Connector
Key Features
- Use with SLXD4, SLXD4D, SLXD5 Receiver
- For XLR Handheld and Shotgun Mics
- Provides +12 or +48 VDC Phantom Power
- Twist-Lock XLR Microphone Connector
- 118 dB Dynamic Range, 24-Bit Audio
- 44 MHz Bandwidth, 1760 Frequencies
- Switchable 1/10/30 mW RF Output Levels
- Rugged Metal Construction
- 8-Hours on Two AAs or SB903 Battery






